We are searching data for your request:
Forums and discussions:
Manuals and reference books:
Data from registers:
Upon completion, a link will appear to access the found materials.
Tip n ° 1: decrease the tank capacity
No need to be a DIY expert to reduce the tank capacity at home. You just have to place a filled bottle of water in it so that it stays at the bottom. Each filling will therefore save 1.5 liters! You can also try the experiment with a brick. The only problem is that the latter will tend to crumble over time and the particles may hinder the system.Tip # 2: set the float down
And yes ! By changing the curvature of the float rod, by tilting it down for example, you can significantly reduce your water consumption in the toilet with each flush. Be careful not to place the float too low as this may prevent the valve from closing!
Tip 3: replace your traditional tank
Last tip that can help you save water: change your classic tank with a double-touch flush. The latter allows you to choose between two volumes of water to deliver just as effective, 6 or 3 liters. If this technique will ask you for a small budget (count around fifty euros), the investment will quickly pay off!
The relevant point of view
I used to think differently, thanks for the help in this matter.
I confirm. I agree with all of the above. We can communicate on this theme.
Yes, all can be
Thanks for the valuable information. It very much was useful to me.
Cute phrase